A whole raft of new tooling is now available from Chronos.

The new rear toolpost for
Myford ML7 and Super 7 Lathe simply slides onto the T-slotted cross slide. T-stud , washer and nut included. Blade is a HSS 5/32 x 24 mm x 150 mm .
Toolpost is 85 mm high
base is 50 x 45 mm

£37.80 inc VAT and delivery

And this one comes with a blade 25 mm wide x 110 mm long. 3 mm Carbide Insert included.


Glanze sets of indexable lathe tools come in various sizes from 6mm to 16mm and cover a wide range of turning applications using a single type of indexable carbide insert (CCMT 060204)
Includes the following tools:
Boring & facing counterbore for minimum bore size dia of 9.5mm
° Chamfer on RH side and 55° on LH side
° Chamfer on both LH & RH side
Only through facing with 75
° approach utilising 100° LH unused cutting corners
Only turning with 75
° approach utilising 100° unused RH cutting corners
Turning & facing at 90
° with 95° approach H style
Turning & facing at 90
° with 95° approach RH style

Sets of four DCMT lathe tools are also available in sizes from 10mm to 16mm

Other new lathe tools are now available, including this front mount 3-jaw chuck. The body is 80mm diameter and 50mm deep. The recess in the rear is 55mm diameter and it is secured from the front by three cap head screws (included). Inside and outside jaws are also included together with a key.

And a 4-jaw self-centring chuck. It has an M14 x 1 Threaded body to screw directly on the spindle nose.
The body is 70 mm diameter and 35 mm deep.
This is a key operated scroll chuck and is much easier to use than the conventional Tommy Bar type chucks.
A set of reversible Jaws is also included.


See more at: