TOOLING  OFFERS

Chronos has a number of special offers at the moment. These include limited numbers of:


3G Profiling Tool 10 mm Square Shank complete with 6mm dia carbide insert. These tools come complete with insert and torx key.The screws are Swiss. For your small lathe etc.
10 mm Square Shank
70 mm Long

£9 + VAT







Soba 6 pc ER32 Collet Set with 3MT or R8 Holder - Special Offer

£65.00 + VAT.

New From Soba contains - Collets- 5-6mm 7-8mm 9-10mm 11-12mm 15-16mm 19-20mm marked with metric and imperial sizes.








39 PC BSW BSF UNC UNF BSP tap and die set

14 BSF -5/16 BSF -3/8 BSF -7/16 BSF
1/2 BSF -1/4 BSW -5/16 BSW -3/8 BSW
7/16 BSW 1/2 BSW -1/8 BSP -4-40 UNC
6-32 UNC -8-32 UNC -10-24 UNC -10-32 UNF
12-24 UNF

Plus tap holder, dienut holder, tap wrench, screw pitch gauge, and screwdriver,

£20 + VAT










4" Super Precision Swivel/Tilt Milling Vice

Manufactured from close grained high tensile seasoned cast iron.

The tilting adjustment is achieved via an angular slide that can be set at any desired angle 45 degrees on either side

The 360 degree swivel base allows the vice to be set at any angle along with the vertical axis . The jaws are fully hardened and ground with a parallelism of 0.0012" (30 microns) The hardness of the jaws is 55 +- HRC

Jaw Width - 4"/100mm

Jaw Opening - 4"/100mm

Jaw Depth - 1 3/4"/45mm

£91.00 + VAT













Click here for more details of these offers