Carrying on from its commitment to the GH1232, one of the most popular machines in the Warco metalworking lathe range, the Surrey firm has introduced the all new GH1236 lathe.

With all of features of the GH1232, the GH1236 has the benefit of greater capacity, with 910mm between centres. Overall length is 1660mm (160mm longer than the 1232).

This lathe comes complete with an integrated coolant supply, 2-axis digital readout system, halogen lighting plus a large range of standard equipment including tool post, travelling steadies, faceplate, dead centres, chucks, cabinet stand and more. It is priced at £2850 including VAT and UK mainland delivery.


Features include:

  1. Induction hardened and ground bedways

  2. Hardened and precision ground headstock gears

  3. High tensile cast iron bed

  4. Taper roller bearing headstock spindle

  5. Jogging switch

  6. Dual dials

  7. Gap bed

  8. Overload clutch to main feed shaft

  9. 1500w motor

Supplied with a range of accessories and tools, including:

  1. 3-Jaw chuck - 160mm camlock with inside/ outside jaws

  2. 4-Jaw chuck - 200m independent

  3. Fixed and travelling steadies

  4. Faceplate

  5. 4-way indexable toolpost

  6. Rear chip guard

  7. Two dead centres

  8. Cabinet stand

  9. Telescopic leadscrew covers

  10. Micro adjustable bed stop

  11. Halogen low voltage lighting

  12. Coolant system - capacity 10 litres

  13. 2-Axis Digital Readout

Full spec and details at the Warco website.