NEW PRODUCTS 2020

R8 2” Boring Head  Set with 4 Indexable Boring Bars

Tapped 7/16 UNF for a drawbar

Includes 4 Indexable boring bars with TCMT1120 Inserts

Lengths are 2 3/4 ” , 3″ , 3 1/2 ” & 4″

Supplied in aluminium storage case

£88.69 (£106.43 incl VAT and mainland UK delivery)

-


R8 3” Boring Head  Set with 8 Indexable Boring Bars

Tapped 7/16 UNF for a drawbar

Includes 4 Indexable boring bars with TCMT1120 Inserts

3 1/2 ” , 3 3/4″ ,4″ ,  4 1/4(x2)  ” & 4 1/2 ” , 5″ & 5  1/2 ”

Supplied in aluminium storage case

£162.35 (£194.82 incl VAT and mainland UK delivery)

-



80 mm 3 Jaw Self Centring Chuck Threaded 1 1/8 x 12 tpi to suit Myford

comes complete with internal and external jaws and chuck key

Soba brand quality chuck

80 mm Dia

55 mm Deep

£70.80 (£84.96 incl VAT and mainland UK delivery)

-


2MT Tailstock Die Holder & Tap Holder set 

The unique design of the two piece head of this unit allows the die centre line to be set on that of the lathe spindle. This compensates for out of alignment caused by collapsing of the die to adjust the thread diameter and any other misalignment in the set up.

Holds 13/16”, 1”, 1 5/16” & 1 1/2” diameter dies.

The Tap Holder is included to allow tapping on the same principle as above. Also included are extra Tommy bars etc to use the tap holder as a conventional Hand Tap wrench as well as a machine one.

Specification

DIE HOLDER BODY

13/16″ – 1″

DIE HOLDER

1.3/16″

DIE HOLDER

1.1/2″

MT-2 SHANK TANG

MT-2 X 5/8″

TAP HOLDER ( 5/8″ ST. SHANK)

1/16″ – 1/4″

TAP HOLDER ( 5/8″ ST. SHANK)

1/4″ – 1/2″

ST. HANDLE

10X125mm

£38.57 (£46.28 incl VAT and mainland UK delivery)

-


3MT Tailstock Die Holder & Tap Holder set 

The unique design of the two piece head of this unit allows the die centre line to be set on that of the lathe spindle. This compensates for out of alignment caused by collapsing of the die to adjust the thread diameter and any other misalignment in the set up.

Holds 13/16”, 1”, 1 5/16” & 1 1/2” diameter dies.

The Tap Holder is included to allow tapping on the same principle as above. Also included are extra Tommy bars etc to use the tap holder as a conventional Hand Tap wrench as well as a machine one.

Specification

DIE HOLDER BODY

13/16″ – 1″

DIE HOLDER

1.3/16″

DIE HOLDER

1.1/2″

MT-3 SHANK TANG

MT-3 X 5/8″

TAP HOLDER ( 5/8″ ST. SHANK)

1/16″ – 1/4″

TAP HOLDER ( 5/8″ ST. SHANK)

1/4″ – 1/2″

ST. HANDLE

10X125mm

£38.57 (£46.28 incl VAT and mainland UK delivery)


-

Dasqua Machinists Grade 0 – 100 mm Dial Caliper

• Strictly made in accordance with DIN862.

• Knife edge contacts for both inside and outside measurements

• Four-way measuring for outside,inside,depth and step.

• Hardened,grounded and lapped measuring surfaces.

• Silky smoothy movement throught.

• Solid stainless steel construction.

• Tough shockproof grearing.

0-100mm/0.02mm

£19.48 (£23.38 incl VAT and mainland UK delivery)

-


Dasqua Power Magnetic Base 80KG

Forced Locking Mechanical Universal Arm

New type locking mechanism, strong arm lock.

All parts use hardened high class steel, hardness reach HRC 58°+

Main parts are generated on CNC machines.

The tightening knob is ergonomically designed, so it has more comfortable and smooth hand feeling.

Two clamping holes, suitable metric and inch dial indicators.

Inner structure is made of bearing steel, more wear-resisting and long service life.

80kg magnetic force and 275 mm arm length

£34.71 (£41.65 incl VAT and mainland UK delivery)

 

New products for 2020 from Chronos.

https://www.sarikhobbies.com/model-engineer-builder/

Modelengineeringwebsite.com

the only free and the only weekly magazine for model engineers. 

Editor: David Carpenter