Dasqua Digital Zero Setting Device
Height 50mm, with graduation 0.01mm
For setting tools to zero determining the reference point of the machine spindle
Special hardened steel
No damage to cutting edge of tool during setting
No feeler gauge or edge finder necessary
Technical Data:
Height of body-reference face:49mm;
Indicator display:0.01mm;
Spring-mounted contact face:52.5mm;
Height of the spring-loaded probe face when the Digital indicator reads 50mm
A Section Linked Drive Belt 12 mm wide.
Sold by the metre - this linked belting is great for many applications where the fitting of a new belt is difficult.
A Section - 12 mm wide suitable for many lathes etc including Myford.
It is easy to fit and requires no special tools - the links just twist together to make any length required.
£17.68 inc VAT and UK mainland delivery.
Also available: Z Section Linked Drive Belt 10 mm wide.
Dasqua Set of 3 Micrometers 0 - 3" / 0.0001"
Made in accordance with DIN863
Ratchet Stop
Spindle Lock
Carbide Measuring Faces
Satin Chrome Finish with Heat Shield
Setting Standards Included
Complete in a Fitted Case
£39.95 inc VAT and UK mainland delivery.
Metric also available. Also other options.
Dasqua Premium Magnetic Parallel Set
WIDTH TOLERANCE + - 0.01 MM
HARDNESS 55-60 HRC
REDUCES THE CLAMPING TIME UP TO 10%
PRECISION GROUND AS PAIRS
LENGTH 150MM,
WIDTH 2.5MM
HEIGHT 25MM; 35MM; 40MM; 45MM; 47MM
RELIABLE HIGH PRECISION
EXCELLENT SURFACE AND STABILITY
HIGH DURABILITY
£51.38 inc VAT and UK mainland delivery.
An ER25 Collet chuck complete with nose cone , spanner and tommy bar to fit to your lathe
55mm register
PCD 63mm
3 Mounting Holes
Screws and washers are included
£38.52 inc VAT and mainland UK delivery.
Other sizes available with/without collet sets.
Camlock Chuck Backplate D1-3 For 125 mm Lathe Chucks
D1 Type Backplate for 125 mm chucks D-13 Type
Complete with mounting studs and screws
26 mm thick
£41.22inc VAT and UK mainland delivery.
Other sizes available.
