Chronos has a good range of specialised equipment for the workshop engaged in smaller work. New items and some special offers, too.
Max. working width 76 mm
Adjustable depth guide permits duplication of bend placement
Will bend up to 0.5mm half hard brass
£42.96 Inc VAT
Proxxon MF 70 Milling Machine 371104 Offer price £265.00 inc VAT
This is a little machine for modelling work in a variety of materials. The extruded aluminium compound table has low backlash leadscrews and adjustable gib plates for smooth, accurate movement. Supplied complete with a set of six collets of 1.0mm, 1.5mm, 2.0mm, 2.4mm, 3.0mm, 3.2mm diameter and a work clamping kit. An optional set of solid carbide cutters is available, sizes 1.0mm, 2.0mm and 3.0mm.
List price £47.95 -Offer price £39.95 inc VAT
Precision steel vice PM 40. Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for working with the MICRO miller MF 70 or the MICRO compound table KT 70. Sliding blocks and fixing screws included. Comes in a wooden box.
* Used to drill off-set holes and to mill off-set slots, rectangles, hex shapes, etc.
* Scale on the housing enables high accuracy divisions
* Chuck with reversible jaws
* Clamps 1.5 - 32mm internal & 12 - 65mm external
* 11 mm bore allows the passage of longer work pieces when used in the horizontal position
* Fixing holes for horizontal & vertical assembly
* Suitable sliding blocks & fixation screws for assembly to MICRO Miller MF 70 & Compound Table KT 70
* Supplied in wooden box with sliding lid
Proxxon 3 Piece Tungsten Milling Cutter Set (Ref: 27116X)
List price £21.95 - Offer price £17.95 inc VAT
These double flute cutters are made of solid tungsten, clockwise cutting. The fishtail profile ensures cutting to the centre, allowing boring too. Usable on cast iron, hardened cast iron, steel, cast steel, brass, aluminium, and even glass, plastics and carbon fibre. One each of shaft dia. 1.0 - 2.0 and 3.0 mm. Supplied in a wooden box with sliding lid.
List price £189.95 - Offer price £158.00 inc VAT
Machined worktop of ribbed die cast aluminium (220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel column, 280 high x 20mm diameter. Super stable die-cast head with VDE approved 240V, 85W motor. Power transmission by aluminium pulleys and flat belt. Three spindle speeds of 1,800, 4,700 and 8,500 rpm. Chrome feed lever with adjustable depth scale. The spindle is supported by 3 high quality sealed bearings. Recessed spindle for insertion of MICROMOT steel collets but also threaded for drill chucks 3/8" thread. 30mm feed. Quill diameter 32mm, with return spring. Throat depth, column to drill spindle, 140mm. Quick coarse height adjustment of headstock with clamp levers. Maximum height 140mm. Supplied with six triple slit precision collets (1.0, 1.5, 2.0, 2.4, 3.0, 3.2mm).
Vice not included
Specification for Proxxon TBM 220 Bench Drill:
Chuck Travel: 30mm
Collets Supplied: 1.0, 1.5, 2.0, 2.4, 3.0 & 3.2mm
Diameter of Column: 20mm
Model: TBM 220
Nett Weight: 3.3kg
Power: 85W
Speed: 1,800, 4,700 & 8,500rpm
Proxxon Drill Chuck for TBM Bench Drill 702061 (Ref: 28122X)
List price £12.25 - Offer price £9.95 INC VAT
For drill shank sizes 0.5 to 6.0mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.
List price £15.95 - Offer price £13.20 INC VAT
The MS 4 Machine Vice is made of die-cast zinc with three machined sides and horizontal & vertical V-slots in the jaws. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.
List price £89.95 - Offer price £72.00 INC VAT
Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning. Both handwheels have zero-resettable dials with graduations indicating 1 revolution = 1.0mm and 1 division = 0.05mm. X travel 134mm and Y travel 46mm having a maximum height of 43mm and table size of 200 x 70mm. Supplied with two step clamps and the clamps and securing bolts for the TBM bench drill.
List price £519.96 - Offer price £434.11 INC VAT
Key Features:
Accurate bed made from cast aluminium
Spindle made from diecast aluminium
Speed range of 500-5000rpm
Headstock suitable to take ER11 collets
Tailstock has a MK0/short bore
Quick change tool post for 6mm tooling
The Proxxon FD150/E is a compact metal working lathe for facing and longitudinal turning, boring, taper turning, parting and drilling. The high maximum speed (5000rpm) allows very small diameters to be machined. The lathe has an accurate bed made from cast aluminium and the spindle from diecast aluminium. It is run using a powerful, quiet running DC motor which has a two stage belt drive used in conjunction with an electronic speed control to achieve the full speed range (500-5000rpm). The main spindle runs with precision bearings and has a continuous bore of 8.5mm. A three jaw self-centring chuck is supplied with an inside jaw range of 1.5-32mm and 12-65mm outside. The tailstock comes with a live centre and has an MK0/short bore. There is a quick change tool post with the machine accepting 6mm tooling.
Specification for Proxxon FD 150/E Lathe:
Cross Slide Travel (X) 40mm, (Z) 60mm
Distance Between Centres 150mm
Height Over Cross Slide 33mm
Model FD 150/E
Nett Weight 4.5kg
Overall L x W x H 360 x 150 x 150mm
Speed Range 500 - 5000rpm
Spindle Bore 8.5mm
Spindle Speed MK0/short bore
List price £999.95 - Offer price £835.96 INC VAT
Key Features:
Distance between centres: 250mm
Swing: 70mm
Height over cross slide: 46mm
6 Speeds: 100-3000rpm
Motor power: 150W
Chuck diameter: 70mm
Weight: 12kg
The Proxxon PD250/E metalworking lathe succeeds the popular PD230/E. It has a distance between centres of 250mm, a swing of 70mm and an impressive 46mm over the slide. It has an automatic feed, thread cutting facilities, headstock chuck, live centre and top slide for taper turning. Equipped with with an electronic speed control with a spindle range of 100-3000rpm, depending on belt ratio. The lathe chuck has a 3-jaw chuck made to DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws is from 2-90mm. Included is a lathe chuck guard with safety shutdown. The lathe has a mounting plate for the PF230 mill/drill head to be fixed to it and a range of accessories is available.
Specification for Proxxon PD 250/E Precision Lathe:
Distance Between Centres 250mm
Height Over Cross Slide 46mm
Model PD 250/E
Nett Weight 12kg
Power 150W
Speed Range 100 - 3000rpm
More details on all these items and more at http://www.chronos.ltd.uk