![](New_Warco_mills_files/wm-16b-mill-1.jpg)
The WM 16B has a traditional belt drive system with a variable speed motor. Table size is 700 x 180mm and has three slots. Cross traverse is 180mm, longitudinal 490mm and vertical 330mm. The spindle has a 3MT bore. The head tilts either side, It is fitted with a 1kw motor.
Features:
-
•Variable speed
-
•Brushless motor
-
•Poly V-belt drive
-
•Rack and pinion drilling action
-
•Head elevates on two dovetail slideways
-
•Rigid square column
-
•Friction fine feed with digital metric / imperial depth gauge
-
•Adjustable gibs to all axes
-
•Table locks to X and Y axes
-
•Head tilts in either direction
-
•Rev. counter with large easy to read digits
-
•Supplied with 13mm drill chuck
-
•Forward and reverse
-
•Powerful 1kw motor
-
•Two belt settings for maximum torque in the low speed range
Price: £1250 inc VAT
![](New_Warco_mills_files/wm-16b-mill.jpg)
![](New_Warco_mills_files/gh-16-mill.jpg)
Features:
-
•Compact machine
-
•Rigid construction with large section square column
-
•Oil immersed steel tempered gears
-
•Head elevates on dovetail slideways allowing positive location over entire travel
-
•Tapered gibs on all axes
-
•Rack and pinion drill feed
-
•Calibrated fine feed
-
•Tilting head, calibrated 45º 0 45º
-
•Positive quill depth stop
-
•Forward and reverse
-
•Table locks to X and Y travel
-
•Supplied with 13mm drill chuck
-
•English or Metric
Price: £1365 inc VAT
![](New_Warco_mills_files/gh-16-mill-1.jpg)